Skip to main content
0

Installation

or
All (74) Accessibility Standards and Compliance (5) Applications (4) Design and Specification (4) Installation (20) International Orders (4) Materials and Finishes (17) Product Guides (12) Tactile Guidance Systems (10)
All (74)

Demarcation studs vs tactile studs: what’s the difference?

Demarcation studs and tactile studs can look similar, but their purpose and layout differ. Learn...

How to choose the right demarcation stud

From outdoor dining areas to parking spaces, choosing the right demarcation stud depends on the...

When do I need a bespoke architectural stud?

Find out when a bespoke architectural stud is required, when a standard product will work,...

What information does Studmarc need to recommend the right product?

Not sure which Studmarc product is right for your project? Find out what information, drawings,...

How do I specify anti-skate studs for a project?

A practical guide to specifying architectural studs for anti-skate applications, covering product selection, materials, finishes,...

Are anti-skate studs suitable for coastal environments?

Anti-skate studs can be used in coastal environments when the correct material and finish are...

What surfaces can anti-skate studs be installed on?

Anti-skate studs can be installed on stone, concrete, brick, timber, metal, handrails, coping stones and...

What measurements do I need for anti-skate studs?

Learn which measurements to take for walls, ledges, coping stones and handrails before selecting anti-skate...

How far apart should anti-skate studs be installed?

Studmarc recommends installing anti-skate studs at 500mm centres as a general guide. Learn what affects...

Anti-skate studs vs anti-skate blades: which should I use?

Compare anti-skate studs and anti-skate blades to understand which solution is best suited to your...

Accessibility Standards and Compliance (5)

What makes tactile studs and strips compliant?

A practical introduction to the UK guidance commonly considered when selecting and laying out tactile...

What guidance applies to tactile guidance paving?

Currently there are two different documents in circulation regarding the use of tactile guidance paving....

How does Part K of the Building Regulations apply to Handrail Anti-Skate Studs? 

Part K or Approved Document K is the statutory guidance on protection from falling, collision,...

How do Part M regs apply to tactile studs and strips?

Part M or Approved Document M refers to governmental guidance surrounding the access and use...

What does DfT (Department for Transport) compliant mean?

DETR is the Department of the Environment, Transport and Regions, they oversee the regulations that...

Applications (4)

When to use temporary tactile ground surface indicators

Temporary tactile ground surface indicators such as tactile studs and strips may be called for...

Which tactile stud will accurately recreate blister paving?

In some scenarios, it can often be advantageous to recreate blister paving using tactile studs...

How do architectural studs prevent anti-social behaviour?

Architectural studs are a valuable tool in preventing anti-social behaviour as they act as visual...

Should I install stair nosings or tactile studs on stone stairs?

When searching for additional grip on stone stair sets, whether new or old, it can...

Design and Specification (4)

When do I need a bespoke architectural stud?

Find out when a bespoke architectural stud is required, when a standard product will work,...

What information does Studmarc need to recommend the right product?

Not sure which Studmarc product is right for your project? Find out what information, drawings,...

How do I specify anti-skate studs for a project?

A practical guide to specifying architectural studs for anti-skate applications, covering product selection, materials, finishes,...

How to specify NBS listed products using the Studmarc website

As of January 2024, many of our products are available for specification via the NBS...

Installation (20)

What surfaces can anti-skate studs be installed on?

Anti-skate studs can be installed on stone, concrete, brick, timber, metal, handrails, coping stones and...

How far apart should anti-skate studs be installed?

Studmarc recommends installing anti-skate studs at 500mm centres as a general guide. Learn what affects...

How to install tactile studs and strips

A complete guide to planning, setting out and installing tactile studs and strips on existing...

How to use epoxy resin to install architectural studs

Epoxy resin is the primary installation fixing agent for architectural studs, and for good reason....

How far apart should I install tactile studs in place of stair nosing?

There’s currently no guidance that pertains to exactly how far apart tactile studs should be...

Retrofitting tactile studs utilising worn tactile paving

Over time concrete blister paving wears down and chips away as the amount of footfall...

Can I install tactile studs in place of stair nosing?

In some circumstances, installing tactile studs in place of stair nosing may be preferable. This...

How to install anti-skate studs

Excerpt: A practical guide to installing anti-skate studs on walls, ledges and coping stones, covering...

How to install demarcation studs

Watch our demarcation stud installation video and follow the step-by-step guide to marking out, drilling,...

What tactile stud height do I need?

With the sheer number of variations in tactile studs it can be difficult to know...

How to remove self-adhesive tactile tiles and indicators?

In comparison to their TPU counterparts, steel and other metal tactile indicators present slightly more...

Can I install tactile studs on porcelain or ceramic tiles?

As a rule, we don’t recommend installing tactile studs or strips with a fixing pin...

What are the different types of tactile stud and strip fixing pins?

When choosing a tactile stud or strip you can be presented with an overwhelming number...

How should I install temporary tactile studs and strips?

In some situations it may call for a temporary solution for accessibility and anti-slip purposes....

How far apart should tactile strips be installed from each other?

To recreate the common 400mm sq corduroy tile pattern with tactile strips...

How far apart should tactile studs be installed from each other?

To recreate the common 400mm sq blister tile pattern with studs (commonly found at traffic...

Can tactile studs be installed on a loose gravel or stone driveway?

It’s not recommended that tactile studs are installed on surfaces with a loose substrate such...

Can I install tactile studs and strips on a wooden surface?

It is absolutely possible to install tactile studs and strips on wooden surfaces and to...

How to install self-adhesive studs and strips

Installing self-adhesive studs and strips is a simple process, but it still requires a degree...

Epoxy resin – a complete guide

Epoxy resin is a clear liquid polymer that when combined with a catalyst or heated,...

International Orders (4)

Can I order from Studmarc from outside the UK?

The Studmarc website is now set up to take international orders with live shipping rates!

A guide to DAP (Delivered at Place) for international orders

The method by which Studmarc ships is commonly known as DAP or delivered at place....

What is an EORI number, and do I need one?

An EORI number (said: Ee-or-Ee) is an Economic Operations and Identification number, it’s required to...

Do I need to approve or sign off on my order?

For any products purchased through email inquiry or that are of a bespoke design, we’ll...

Materials and Finishes (17)

Are anti-skate studs suitable for coastal environments?

Anti-skate studs can be used in coastal environments when the correct material and finish are...

What are tactile studs and strips made from?

A guide to the materials used for tactile studs and strips and the factors that...

Road studs – Aluminium or Stainless Steel?

When it comes to road studs, or pelistuds as they’re often called, there are a...

What does quality mean for tactile studs and strips?

Quality is a description given to so many things that it’s hard to know when...

The benefits of tactile studs with inserts

Full metal tactile studs are vital in conveying key tactile messages underfoot for the visually...

What quality controls do tactile studs and strips have in place?

Due to the highly specific nature of tactile studs and strips, accuracy in manufacturing is...

Stainless steel tactile studs or concrete blister paving?

A major part of purchasing tactile devices and carrying out any installation is knowing that...

Which tactile stud pattern is best for grip?

There are three primary groups of tactile stud patterns, and they are plain surface, crosshatch,...

What’s the difference between 304 and 316 Stainless Steel?

Both 304 and 316 stainless steels are widely used for tactile studs and strips and...

What is a fishtail shank or fishtail stem?

A fishtail shank or fishtail stem refers to the pins affixed to certain models of...

Why choose bronze for tactile indicators?

Bronze is a commonly used metal in sculptures and artwork, well known for its deep...

What’s the difference between laser etching and laser engraving?

Both laser etching and laser engraving are often conflated as they are techniques used to...

Why choose aluminium for tactile indicators?

There is a plethora of metals to choose from when it comes to tactile indicators,...

How are anti-slip profiles measured and what is an R-Rating?

There are multiple measurement of the level of grip provided by a surface including R-ratings...

When is the colour red used in tactile paving?

Visual contrast is a very important part of navigating the world for the visually impaired....

What is TPU or Thermoplastic Polyurethane?

TPU or Thermoplastic Polyurethane is a thermoplastic elastomer that consists of a mix of rubber...

What is 316 Marine Grade Stainless Steel?

Marine grade stainless-steel is a 316 type of stainless-steel that contains Molybdenum as part of...

Product Guides (12)

Demarcation studs vs tactile studs: what’s the difference?

Demarcation studs and tactile studs can look similar, but their purpose and layout differ. Learn...

How to choose the right demarcation stud

From outdoor dining areas to parking spaces, choosing the right demarcation stud depends on the...

What measurements do I need for anti-skate studs?

Learn which measurements to take for walls, ledges, coping stones and handrails before selecting anti-skate...

Anti-skate studs vs anti-skate blades: which should I use?

Compare anti-skate studs and anti-skate blades to understand which solution is best suited to your...

How do I choose the right anti-skate stud?

Choosing the right anti-skate stud depends on the installation location, edge profile, coverage and fixing...

How do I choose the right tactile stud or strip?

A practical guide to choosing tactile studs and strips based on their application, material, appearance,...

Stair Tread Inserts vs. Stair Nosings: What’s the difference and which should you use?

Although stair tread inserts and stair nosing look to accomplish the same goals, they are...

What are Stair Tread Inserts and how are they used?

Stair tread inserts are both tactile and visual indicators installed into steps to aid visibility...

Anti-skate studs – A complete guide

A complete guide to anti-skate protection, covering where anti-skate studs and blades are used, materials,...

What are anti-skate studs?

Anti-skate studs are metal implements added to long straight edges on outdoor structures, furniture, and...

What is a demarcation stud?

A demarcation stud is both a tactile and visual indicator used to mark out a...

What are road studs and how are they used?

Road studs are a common site on roads in the UK but can be easily...

Tactile Guidance Systems (10)

Tactile studs and strips – A complete guide

A complete introduction to tactile studs and strips, from the messages they communicate to their...

A guide to tactile paving patterns

There are numerous patterns used in tactile paving and they can be easily mistaken for...

When to use temporary tactile ground surface indicators

Temporary tactile ground surface indicators such as tactile studs and strips may be called for...

Which tactile stud will accurately recreate blister paving?

In some scenarios, it can often be advantageous to recreate blister paving using tactile studs...

What is a tactile stud?

A tactile stud is a tactile indicator that is typically used in set configurations to...

What is a tactile strip?

The term tactile strip refers to a type of tactile indicator that is used in...

When to use self-adhesive tactile studs and strips

Self-adhesive tactile studs and strips can be a great solution for many different surfaces, often...

What’s the difference between on-street and off-street warning surfaces?

On-street and off-street terms refer to where a warning surface such as blister paving is...

Retrofitting tactile studs and strips – what are the benefits?

There are a great many benefits to retrofitting tactile studs and strips in place of...

How do tactile studs work?

The next time you’re walking through a city, look down at your feet. You’ll probably...

Demarcation studs vs tactile studs: what’s the difference?

Demarcation studs and tactile studs can look similar, but their purpose and layout differ. Learn...

How to choose the right demarcation stud

From outdoor dining areas to parking spaces, choosing the right demarcation stud depends on the...

When do I need a bespoke architectural stud?

Find out when a bespoke architectural stud is required, when a standard product will work,...

What information does Studmarc need to recommend the right product?

Not sure which Studmarc product is right for your project? Find out what information, drawings,...

How do I specify anti-skate studs for a project?

A practical guide to specifying architectural studs for anti-skate applications, covering product selection, materials, finishes,...

Are anti-skate studs suitable for coastal environments?

Anti-skate studs can be used in coastal environments when the correct material and finish are...

What surfaces can anti-skate studs be installed on?

Anti-skate studs can be installed on stone, concrete, brick, timber, metal, handrails, coping stones and...

What measurements do I need for anti-skate studs?

Learn which measurements to take for walls, ledges, coping stones and handrails before selecting anti-skate...

How far apart should anti-skate studs be installed?

Studmarc recommends installing anti-skate studs at 500mm centres as a general guide. Learn what affects...

Anti-skate studs vs anti-skate blades: which should I use?

Compare anti-skate studs and anti-skate blades to understand which solution is best suited to your...

What makes tactile studs and strips compliant?

A practical introduction to the UK guidance commonly considered when selecting and laying out tactile...

What guidance applies to tactile guidance paving?

Currently there are two different documents in circulation regarding the use of tactile guidance paving....

How does Part K of the Building Regulations apply to Handrail Anti-Skate Studs? 

Part K or Approved Document K is the statutory guidance on protection from falling, collision,...

How do Part M regs apply to tactile studs and strips?

Part M or Approved Document M refers to governmental guidance surrounding the access and use...

What does DfT (Department for Transport) compliant mean?

DETR is the Department of the Environment, Transport and Regions, they oversee the regulations that...

When to use temporary tactile ground surface indicators

Temporary tactile ground surface indicators such as tactile studs and strips may be called for...

Which tactile stud will accurately recreate blister paving?

In some scenarios, it can often be advantageous to recreate blister paving using tactile studs...

How do architectural studs prevent anti-social behaviour?

Architectural studs are a valuable tool in preventing anti-social behaviour as they act as visual...

Should I install stair nosings or tactile studs on stone stairs?

When searching for additional grip on stone stair sets, whether new or old, it can...

When do I need a bespoke architectural stud?

Find out when a bespoke architectural stud is required, when a standard product will work,...

What information does Studmarc need to recommend the right product?

Not sure which Studmarc product is right for your project? Find out what information, drawings,...

How do I specify anti-skate studs for a project?

A practical guide to specifying architectural studs for anti-skate applications, covering product selection, materials, finishes,...

How to specify NBS listed products using the Studmarc website

As of January 2024, many of our products are available for specification via the NBS...

What surfaces can anti-skate studs be installed on?

Anti-skate studs can be installed on stone, concrete, brick, timber, metal, handrails, coping stones and...

How far apart should anti-skate studs be installed?

Studmarc recommends installing anti-skate studs at 500mm centres as a general guide. Learn what affects...

How to install tactile studs and strips

A complete guide to planning, setting out and installing tactile studs and strips on existing...

How to use epoxy resin to install architectural studs

Epoxy resin is the primary installation fixing agent for architectural studs, and for good reason....

How far apart should I install tactile studs in place of stair nosing?

There’s currently no guidance that pertains to exactly how far apart tactile studs should be...

Retrofitting tactile studs utilising worn tactile paving

Over time concrete blister paving wears down and chips away as the amount of footfall...

Can I install tactile studs in place of stair nosing?

In some circumstances, installing tactile studs in place of stair nosing may be preferable. This...

How to install anti-skate studs

Excerpt: A practical guide to installing anti-skate studs on walls, ledges and coping stones, covering...

How to install demarcation studs

Watch our demarcation stud installation video and follow the step-by-step guide to marking out, drilling,...

What tactile stud height do I need?

With the sheer number of variations in tactile studs it can be difficult to know...

How to remove self-adhesive tactile tiles and indicators?

In comparison to their TPU counterparts, steel and other metal tactile indicators present slightly more...

Can I install tactile studs on porcelain or ceramic tiles?

As a rule, we don’t recommend installing tactile studs or strips with a fixing pin...

What are the different types of tactile stud and strip fixing pins?

When choosing a tactile stud or strip you can be presented with an overwhelming number...

How should I install temporary tactile studs and strips?

In some situations it may call for a temporary solution for accessibility and anti-slip purposes....

How far apart should tactile strips be installed from each other?

To recreate the common 400mm sq corduroy tile pattern with tactile strips...

How far apart should tactile studs be installed from each other?

To recreate the common 400mm sq blister tile pattern with studs (commonly found at traffic...

Can tactile studs be installed on a loose gravel or stone driveway?

It’s not recommended that tactile studs are installed on surfaces with a loose substrate such...

Can I install tactile studs and strips on a wooden surface?

It is absolutely possible to install tactile studs and strips on wooden surfaces and to...

How to install self-adhesive studs and strips

Installing self-adhesive studs and strips is a simple process, but it still requires a degree...

Epoxy resin – a complete guide

Epoxy resin is a clear liquid polymer that when combined with a catalyst or heated,...

Can I order from Studmarc from outside the UK?

The Studmarc website is now set up to take international orders with live shipping rates!

A guide to DAP (Delivered at Place) for international orders

The method by which Studmarc ships is commonly known as DAP or delivered at place....

What is an EORI number, and do I need one?

An EORI number (said: Ee-or-Ee) is an Economic Operations and Identification number, it’s required to...

Do I need to approve or sign off on my order?

For any products purchased through email inquiry or that are of a bespoke design, we’ll...

Are anti-skate studs suitable for coastal environments?

Anti-skate studs can be used in coastal environments when the correct material and finish are...

What are tactile studs and strips made from?

A guide to the materials used for tactile studs and strips and the factors that...

Road studs – Aluminium or Stainless Steel?

When it comes to road studs, or pelistuds as they’re often called, there are a...

What does quality mean for tactile studs and strips?

Quality is a description given to so many things that it’s hard to know when...

The benefits of tactile studs with inserts

Full metal tactile studs are vital in conveying key tactile messages underfoot for the visually...

What quality controls do tactile studs and strips have in place?

Due to the highly specific nature of tactile studs and strips, accuracy in manufacturing is...

Stainless steel tactile studs or concrete blister paving?

A major part of purchasing tactile devices and carrying out any installation is knowing that...

Which tactile stud pattern is best for grip?

There are three primary groups of tactile stud patterns, and they are plain surface, crosshatch,...

What’s the difference between 304 and 316 Stainless Steel?

Both 304 and 316 stainless steels are widely used for tactile studs and strips and...

What is a fishtail shank or fishtail stem?

A fishtail shank or fishtail stem refers to the pins affixed to certain models of...

Why choose bronze for tactile indicators?

Bronze is a commonly used metal in sculptures and artwork, well known for its deep...

What’s the difference between laser etching and laser engraving?

Both laser etching and laser engraving are often conflated as they are techniques used to...

Why choose aluminium for tactile indicators?

There is a plethora of metals to choose from when it comes to tactile indicators,...

How are anti-slip profiles measured and what is an R-Rating?

There are multiple measurement of the level of grip provided by a surface including R-ratings...

When is the colour red used in tactile paving?

Visual contrast is a very important part of navigating the world for the visually impaired....

What is TPU or Thermoplastic Polyurethane?

TPU or Thermoplastic Polyurethane is a thermoplastic elastomer that consists of a mix of rubber...

What is 316 Marine Grade Stainless Steel?

Marine grade stainless-steel is a 316 type of stainless-steel that contains Molybdenum as part of...

Demarcation studs vs tactile studs: what’s the difference?

Demarcation studs and tactile studs can look similar, but their purpose and layout differ. Learn...

How to choose the right demarcation stud

From outdoor dining areas to parking spaces, choosing the right demarcation stud depends on the...

What measurements do I need for anti-skate studs?

Learn which measurements to take for walls, ledges, coping stones and handrails before selecting anti-skate...

Anti-skate studs vs anti-skate blades: which should I use?

Compare anti-skate studs and anti-skate blades to understand which solution is best suited to your...

How do I choose the right anti-skate stud?

Choosing the right anti-skate stud depends on the installation location, edge profile, coverage and fixing...

How do I choose the right tactile stud or strip?

A practical guide to choosing tactile studs and strips based on their application, material, appearance,...

Stair Tread Inserts vs. Stair Nosings: What’s the difference and which should you use?

Although stair tread inserts and stair nosing look to accomplish the same goals, they are...

What are Stair Tread Inserts and how are they used?

Stair tread inserts are both tactile and visual indicators installed into steps to aid visibility...

Anti-skate studs – A complete guide

A complete guide to anti-skate protection, covering where anti-skate studs and blades are used, materials,...

What are anti-skate studs?

Anti-skate studs are metal implements added to long straight edges on outdoor structures, furniture, and...

What is a demarcation stud?

A demarcation stud is both a tactile and visual indicator used to mark out a...

What are road studs and how are they used?

Road studs are a common site on roads in the UK but can be easily...

Tactile studs and strips – A complete guide

A complete introduction to tactile studs and strips, from the messages they communicate to their...

A guide to tactile paving patterns

There are numerous patterns used in tactile paving and they can be easily mistaken for...

When to use temporary tactile ground surface indicators

Temporary tactile ground surface indicators such as tactile studs and strips may be called for...

Which tactile stud will accurately recreate blister paving?

In some scenarios, it can often be advantageous to recreate blister paving using tactile studs...

What is a tactile stud?

A tactile stud is a tactile indicator that is typically used in set configurations to...

What is a tactile strip?

The term tactile strip refers to a type of tactile indicator that is used in...

When to use self-adhesive tactile studs and strips

Self-adhesive tactile studs and strips can be a great solution for many different surfaces, often...

What’s the difference between on-street and off-street warning surfaces?

On-street and off-street terms refer to where a warning surface such as blister paving is...

Retrofitting tactile studs and strips – what are the benefits?

There are a great many benefits to retrofitting tactile studs and strips in place of...

How do tactile studs work?

The next time you’re walking through a city, look down at your feet. You’ll probably...