* The price shown has been converted from GBP to show
you
the
approximate cost in USD. The exchange rate may change before you
pay.
Description
The flush fit visibility stud is manufactured from 316L stainless steel and features a smooth flat surface atop a round head. At 25mm in diameter and 4mm in height, this stud is an ideal inset stair-nosing alternative or area demarcation tool. The surface of the stud can be engraved with signets, logos, or symbols to convey messages to pedestrians. The flush fit visibility stud can be used to guide the blind or visually impaired as a contrasting tool but isn't suitable as a direct replacement for blister paving in public areas such as crossings or before stairs.
Material Information
This stud is made from premium-quality 316L stainless steel to ensure durable performance in the toughest of conditions. 316L stainless steel has far superior weathering resistance when compared to other stainless steel variants, particularly when subjected to harsh rain, snow, or sleet.
Design
The flush fit visibility stud features a smooth surface and sheer edges. The sheer edges allow for the stud to be installed inset into a surface or proud to provide tactile feedback for pedestrians. It can also be customised to include logos or signage due to its flat face. The machine-polished finish creates a reflective effect helping illuminate changes in elevation when installed on stairs in place of nosing, or in locations where the attention of the pedestrian needs to be captured.
Application
These studs are ideal for use as:
- Stair-nosing alternatives
- Area demarcation aids
- Contrasting guidance for the blind and visually impaired
Installation
These studs are installed by:
- Drilling into the desired surface
- Clearing the hole of dust and debris
- Applying epoxy resin as a fixing agent
- Inserting the stud into the hole
Please note: It can take around 24 hours for the epoxy resin to be completely set.
Installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
The flush fit visibility stud is manufactured from 316L stainless steel and features a smooth flat surface atop a round head. At 25mm in diameter and 4mm in height, this stud is an ideal inset stair-nosing alternative or area demarcation tool. The surface of the stud can be engraved with signets, logos, or symbols to convey messages to pedestrians. The flush fit visibility stud can be used to guide the blind or visually impaired as a contrasting tool but isn't suitable as a direct replacement for blister paving in public areas such as crossings or before stairs.
Material Information
This stud is made from premium-quality 316L stainless steel to ensure durable performance in the toughest of conditions. 316L stainless steel has far superior weathering resistance when compared to other stainless steel variants, particularly when subjected to harsh rain, snow, or sleet.
Design
The flush fit visibility stud features a smooth surface and sheer edges. The sheer edges allow for the stud to be installed inset into a surface or proud to provide tactile feedback for pedestrians. It can also be customised to include logos or signage due to its flat face. The machine-polished finish creates a reflective effect helping illuminate changes in elevation when installed on stairs in place of nosing, or in locations where the attention of the pedestrian needs to be captured.
Application
These studs are ideal for use as:
- Stair-nosing alternatives
- Area demarcation aids
- Contrasting guidance for the blind and visually impaired
Installation
These studs are installed by:
- Drilling into the desired surface
- Clearing the hole of dust and debris
- Applying epoxy resin as a fixing agent
- Inserting the stud into the hole
Please note: It can take around 24 hours for the epoxy resin to be completely set.
Installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
