* The price shown has been converted from GBP to show
you
the
approximate cost in USD. The exchange rate may change before you
pay.
Description
This flush fit visibility demarcation stud is manufactured from 316L stainless steel and is finished with a flat smooth surface. At 50mm in diameter and 5mm in height, they're ideal for providing information to pedestrians through engraved symbols and information.
Material Information
This stud is made from high-quality 316L stainless steel to ensure lifelong performance in the toughest of conditions. Due to its composition, 316L stainless steel has far superior weathering resistance when compared to other stainless steel, particularly when subjected to harsh rain, snow, or sleet.
Design
The flush fit visibility stud can be installed proud or flush with the underlying surface due to its sheer sides. The 50mm surface provides ample space for engraving or laser etching information or logos into it.
Application
These studs are ideal for use as:
- Personalisation or signage
- Area demarcation aids
Installation
These studs are installed by:
- Drilling into the desired surface
- Clearing the hole of dust and debris
- Applying epoxy resin as a fixing agent
- Inserting the stud into the hole
Please note: It can take around 24 hours for the epoxy resin to be completely set.
Installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
This flush fit visibility demarcation stud is manufactured from 316L stainless steel and is finished with a flat smooth surface. At 50mm in diameter and 5mm in height, they're ideal for providing information to pedestrians through engraved symbols and information.
Material Information
This stud is made from high-quality 316L stainless steel to ensure lifelong performance in the toughest of conditions. Due to its composition, 316L stainless steel has far superior weathering resistance when compared to other stainless steel, particularly when subjected to harsh rain, snow, or sleet.
Design
The flush fit visibility stud can be installed proud or flush with the underlying surface due to its sheer sides. The 50mm surface provides ample space for engraving or laser etching information or logos into it.
Application
These studs are ideal for use as:
- Personalisation or signage
- Area demarcation aids
Installation
These studs are installed by:
- Drilling into the desired surface
- Clearing the hole of dust and debris
- Applying epoxy resin as a fixing agent
- Inserting the stud into the hole
Please note: It can take around 24 hours for the epoxy resin to be completely set.
Installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
